[Review] Hoodies' Measurement

Group 8 member's particular hoodie was measured by Manostat's vernier caliper from Drexel University's The Innovation Studio. This tool determined the thickness of hoodie string, and the measurement of hoodie tip (length and width) by its slider, which adjusts the distance between two big blades to tighten the string for accurate reading. Figure 2 shows how Brian applies the measuring tool to measure the Emaad's hoodie ring diameter. In fact, Brian tightens the measurement twin blades to fit Emaad's hoodie ring, whose diameter resulted on the vernier calipher.  

Figure 1. Thickness Measurement of Brian's Hoodie String

Figure 2. Diameter Measurement of Emaad's Hoodie Ring

Below is the data list demonstrating the measurement of hoodies' components that consists of ring (diameter), string (diameter, length), tip (width and length). Those components were measured in millimeters.

In fact, the most important factor is the diameter of hoodie ring, which would conclude the maximum diameter of Re-Stringer's clamp mechanism. The hoodie string's length, which is the keystone for researching the extension rod, has a similar range among these strings. Other factors would serve as the supplemental factors for any complex problems in the future!

Hoodie's List	Hoodie Rings	Diameter of  Strings	Hoodie Tip Width	Hoodie Tip Length	String Length
Brian's Hoodie	12.6mm	3.2mm	3.4mm	N/A	381mm
Emaad's Hoodie	10.2mm	3mm	4.3mm	18.4mm	N/A
Dung's Hoodie	8.8mm	4.3mm	4mm	14.8mm	N/A
Paul's Shorts	9mm	3mm	N/A	N/A	N/A

Figure 3: Data Collection for Hoodies' Measurement